If you are a beginner then wiring the LED lights can be tricky and difficult thing for you because it will require complete accuracy in the circuit values and the right number of LEDs in the lighting circuit. It is essential for you to have the knowledge of accurate number of voltage, current and resistance of the LEDs otherwise the circuit will not work as all. So, at the time of wiring the LEDs, it is important for you to make a large number of clean connections by using the delicate parts.
So, if you want to know how to wire led lights then here are some effective steps at https://www.ledlightstech.com that you can follow to wire up the LED lights.
• First of all, you need to gather all the PEDs that you want to wire into the circuit. Most of the Led available in the market needs very little power supply and you can use a decent power supply to put as many LEDs as you want.
• After that, it is important for you to note down the specs of the LEDs. The commercially available LEDs have generally two values such as amperage and voltage that you need to check out. If you want to keep your job simple and easy then you can choose the LEDs that have the same values so that you do not get confused during the process.
• Now you have to decide whether you want to wire the LEDs in parallel or in series. If you need a higher power supply that combined voltage of the light then it is beneficial for you to wire the LEDs in parallel. Apart from this, the LEDs’ voltages are added in the series circuits. If you want to make the wiring process simple then you can wire up in series.
• Now, with the help of an online LED circuit calculator, you can easily –plug in your values and able to resistor the lights as you want. All you have to do is just input the number of LEDs you are using and the voltage of the power supply along with the voltage of every LED and then the calculator will show you that what is the right resistor for you.
• Now, you can wire your resistor into the circuit in an effective manner. you can wire the resistor to the same value but in lower current rating or you can also use the resistor rated to get know about the current of the total circuit and then wire it to the positive terminal of the power supply.
• You can now wire the cathodes of each and every LED in parallel and then hook up the cathode to the common resistor. You have to wire each and every resistor to the positive terminal of the power supply if they have their own resistor.
• Now, you can wire the anodes to the SPST switch and then wire the negative terminal of the power supply to the other terminal of switch. Now you have the LED light circuit.
