Flat roofs are one of the most popular roofing systems constructed by most homeowners nowadays even though there are many roofing systems are available in the market. Flat roofs provide a very unique set of experiments to the roofer. Flat roofs are not sloped so it is not possible to allow for the natural dispose of rainwater. So, nowadays the modern flat roofs are covered by a special membrane that prevents the rainwater from leaking into your roof. Hence, it is necessary to have a gutter to drain off the water in your flat roof. Even the sloping roof also needsthe gutter to dispose of the rainwater completely even during rainstorms or heavy rainfall.
Importance of Gutters
Gutters help to collect the rainwater from the roof or outside of your house, it acts as the best protection device for your home. Without gutters, rainwater can overflow particularly in heavy rain during the rainy season and leak into the base of your home. It can cause damage to your roof and destruction to the entire structure of your home. There are different varieties of gutter systems that come in different types of styles and colors based on your roofing system. The homeowners can select the best one according to the structure of their home.
Gutters for Flat Roof
In a flat roof, the gutter is most essential to prevent rainwater from falling into the ground. Before installing gutters on a flat roof, there are some major things need to consider. They are mentioned as below:
1. Check for Drainage in Your Flat Roof
This is very important if you are planning to make a gutter for your constructed flat roof home. It is necessary to have a proper drainage system in your flat roof to drain off the rainwater.
2. Choose the Best Guttering Designs
The Best drainage system should include important gutters, scuppers, and downspouts to let the water to drain completely. If it is a steep roof above the flat roofing system, then metal flashing can be used.
3. Choose the Best Gutter Materials
The materials which you can use for gutting are made from galvanized steel, aluminum, copper, or vinyl. Each material has its own benefits and advantages, also each material differs while installation. When making a drainage system for your flat roof, all should be considered
Process of Installation
- The First step is to measure the flat roof and select where to place the downspouts.
- Just place each piece of the gutter over together on the ground with an overlap of about 2inches. And at each overlap drill six evenly spaced holes.
- Then secure these gutters with rivets and the with the help of caulk, you can seal the underside of the gutter
- With the help of the gutter sealant you can cut the downspout outlet holes for the best waterproof fit.
But it is highly recommended to get the contractors help from https://www.commercialflatroofs.ca/when installing these types of gutters on a whole flat roof system.
